Building a Hotel Rate Structure from the Base Rate Up

A rate structure is the rule that derives every price from one base rate. Learn how to set room type, board, and cancellation gaps to keep your table consistent.

9 min readTürkçe okuyun

About this postRevenue Management
Contents

What a hotel rate structure is, and why one price list is not enough

A rate structure is the ordered set of prices a hotel sells in one night, across room types, board and conditions, built on one base rate. It is not a price list: it is the rule that says how each price is derived from the base. Without that rule, every discount leaves the next discount without a starting point.

Four layers set the price in a hotel: the base rate, the room type, the board, and the cancellation condition. If each layer is negotiated on its own, the same room sells to two agencies at two prices for the same night, and the difference shows up in nobody's report. The structure fixes the order of the layers and how far each one may move.

Start from the hotel's own reports: room nights sold by room type, the board split, and cancellation rates for the last season. Those three show which gaps actually sell and which exist only on paper. Build the structure on them and you can defend a rate mid-season.

How the base rate is set

The base rate is the price of the room type the hotel sells most, on the simplest board, with the most flexible cancellation condition. Every other price is derived from it. Set it as one number for the whole hotel, not one per room type. The number can move during the season; the derivation rules do not.

Look at three things when you set the base rate: the cost of the room, the price the hotel actually sold at in the same period last season, and the price at which rooms closed in that period. Cost draws a floor, the sold price shows a habit, and the closing price says where demand stopped. Explaining a base rate without the three side by side is hard.

Setting the base rate once and leaving it for the season breaks the table. If the base stays fixed while the room type and board gaps move, no price can be traced back. Update the base rate during the season; hold the gaps.

To see how the base rate reads across channels, look at what a best available rate is and how a hotel sets it: What a best available rate is and how a hotel sets it. The base rate is the internal reference; the BAR is that reference as it opens to a channel. Keep them in one table or the agency rate and the website rate drift apart.

How to build the price gap between room types

The gap between room types is built on the extra value a guest will pay for, not on square meters alone. View, balcony, size, bed count and quiet make up that value. Decide up front whether the gap is a percentage or a fixed amount; mixing the two makes the table unreadable.

To build the gap step by step, see How to set the price gap between room types. While you set it, check how many nights each room type sold last season; raising the gap on a room that does not sell decorates the table without adding revenue.

Do not open the room type gap as a separate negotiation with an agency. The gap is fixed in the hotel's own table; an agency discount applies on top of the table and does not rewrite the gap. Otherwise the sea view room drops to the standard room price at one agency and the table loses its meaning.

How board types change the price

The board gap is an amount added to the room rate, derived from the cost of the meals the guest will actually eat. Setting bed and breakfast, half board and all inclusive independently creates three price worlds in one hotel. Derive the gap from one meal cost table.

To set the board gaps side by side, see Pricing bed and breakfast, half board and all inclusive side by side. Use the cover count and the kitchen's real cost; pricing a meal the guest does not eat inflates the table and makes the sale harder.

Do not change the board gap and the room type gap in the same week. If both move together you cannot see which change moved sales. Hold one and update the other, then read the result.

How to set the gap between non-refundable and flexible rates

A non-refundable rate is the discount given in exchange for the guest giving up the right to cancel; the flexible rate is what a guest pays to keep that right. The gap is built on the hotel's cancellation rate and on how many room nights those cancellations leave empty. Think of the gap as the price of that cost, not as a fixed percentage.

For the steps, see Steps to set the gap between non-refundable and flexible rates. While you work through them, read last season's cancellation rate by room type; if the cancellations cluster in one type, set the gap for that type separately.

When you give the non-refundable rate to an agency, read the contract's cancellation clause separately. If the agency contract carries a cancellation penalty or a no-show penalty, the non-refundable rate you sell to the guest is not the same right you grant the agency. Defending the rate is hard without both conditions in one table.

Putting the rate structure into one table

A rate structure exists the moment the front office and the sales team read the same table. The table should carry room types in rows, board and cancellation condition in columns, and the derivation from the base rate written under it. If the table does not fit on one page, the structure is not built yet.

Give every cell a code: a short letter string for room type, board and condition. The same code must show the same price in the channel manager, the agency contract and the front office screen. If one code lands on two prices, the error is in how the code is pushed to the channel, not in the table.

Print the table once at the start of the season and post it at the front office; log every change on the same page with its date. Then, when a guest asks about a rate taken earlier, the front office can show which rate applied on which date. That log is the simplest way to defend a rate.

Once the structure is built, the real work is how the base rate moves during the season. Tie the update to a written rule: which day, at which occupancy rate, on which pick-up you change the base rate: Dynamic Pricing: Boost GOPPAR, Cut Manual Work. Without the rule, the base rate changes by person mid-season and the table collapses.

Carrying the rate structure into agency contracts and channels

The rate in an agency contract is a discount applied on a cell of the hotel's table, not the table itself. Write into the contract which cell and which period the discount applies to, not the price. Then the agency rate lands in the right place when the table is updated.

In an allotment agreement, think about the release period together with the price. Rooms unsold after the release date return to the hotel; the rate they sell at depends on the table's base rate for that period. If the release period and the base rate are not on the same page, returned rooms either sell too cheap or close unsold.

When a rate is closed in the channel manager, do not assume the same code is closed on the other channels. The closure does not show on another channel until the channel manager pushes the change, and a booking that arrives meanwhile lands at the old rate. Verify each closure one by one as you carry the structure to the channels.

Before signing, check three things: which cell the price applies to, which period the discount covers, and whether the cancellation condition matches the one sold to the guest. Without those three lines, the contract sits outside the rate structure and becomes a separate negotiation mid-season.

The mistakes a rate structure carries

The mistakes in a rate structure sit not in the price but in the missing derivation behind it. The five below each push one table to two prices.

  • Setting the base rate separately for each room type, so the hotel ends up with no single reference.
  • Building the room type gap as a percentage and the board gap as a fixed amount, then mixing the two in one table.
  • Copying the non-refundable gap as a fixed percentage without reading the cancellation rate.
  • Writing the price into the agency contract without the cell and the period the discount applies to.
  • Updating the table mid-season without collecting the old version from the front office, so two versions circulate at once.

The way to close these mistakes at the start of the season is to write the derivation rule under every cell. With the rule written, whoever changes a price mid-season cannot break the table.

Share this post

Frequently Asked Questions

How is a hotel rate structure built?

First set one base rate for the room type the hotel sells most, on the simplest board, with the most flexible condition. Then derive the room type gap, the board gap and the non-refundable gap from that base, and write each cell's derivation rule under the table. The structure is not built until the front office, sales and the channel manager read the table the same way.

Is the base rate the same as the BAR?

No. The base rate is the hotel's internal reference and every price is derived from it; the BAR is that reference as it opens to a channel. Keep them in one table, or the agency rate and the website rate drift apart.

Should the room type gap be a percentage or a fixed amount?

Either works, but pick one method for the whole hotel. A percentage gap lets the table move together when the base rate is updated; a fixed amount keeps the same lira gap when the base rate falls, which you can check in your own table. Mixing the two in one table makes the price impossible to trace.

What should the non-refundable gap be based on?

Base the gap on the hotel's cancellation rate last season and on how many room nights those cancellations left empty. If the cancellations cluster in one room type, set the gap for that type separately. If the agency contract carries a cancellation penalty, show the condition sold to the guest and the condition granted to the agency in one table.

Can the rate structure change during the season?

The base rate can move during the season; the room type, board and cancellation gaps should stay fixed. Tie the base rate update to a written rule: which day, at which occupancy rate, on which pick-up. Without the rule, the base rate changes by person mid-season and the table collapses.

You've read it. Now, your hotel.

In a free review, we look together at how your hotel sells today.

Request your review

The review is free.